Appliance Module Plus


The Appliance Module Plus is a hard-wired load control switch that features two 30A relays for On/Off control. It can also measures the power consumption of the device to provide insight to control your load. The Appliance Module Plus is ideal for hot water heaters, pool pumps, electrical charging stations, heating ventilation air conditioning units and more. The two 30A relays can be configured to act as two independent relays (On/Off, On/Off) or dependent relays (High/ Low/ Off).

The Appliance Module+ comes in two models: (1) Supoprts ZigBee communications (model RD77716); and (2) Supports HomePlug communications (model RD71316). The ZigBee version (model RD77716) can act as a ZigBee wireless mesh repeater. The HomePlug version (model RD71316) communications with the Energy Manager over HomePlug and act as a secondary ZigBee Trust Center on the personal area network (PAN).


  • Monitors individual plug load power consumption
  • Remote On/Off control of individual plug load
  • Easy installation within minutes by a certified electrician
  • Pinpoint how energyis used and where
  • Disaggregated view of energy consumption
  • Over-the-Air (OTA) upgrade feature
  • Intuitive LED indicators for easy troubleshooting
  • Specifications

    Standard Compliance IEEE 802.15.4 (model RD77716) or IEEE 1901.2 (model RD71316)
    Interface 1x Factory Reset Button, 1x Opt-In/Out button
    LEDs Power/ ZigBee/ HomePlug, DRLC Schedule, DRLC Event, Relay#1, Relay#2
    Model RD77716
    Data Rate Up to 250 kbps
    Security 128-bit AES Encryption
    TX/TX Sensitivity -99dBm Rx typ. (-100 in boost mode) at 1% packet error rate and +3dBm TX output power (+5dBm in boost mode)
    Model RD71316
    Data Rate Up to 10 Mbps
    Security 128-bit AES Encryption
    Power Measure
    Value kWh
    Accuracy Class 1
    Resolution kWh = 0.001
    Sensibility 20mA/220V, 40mA/110V
    Power Requirements
    Power Input L-N 120V AC, L1-L2 240V AC 50/60Hz
    Power Supply 100-240VAC 50/60Hz 0.1A
    Power Consumption Max 1.5W
    Dimensions (LxWxD) 7.72x5.7x3.15" (196x145x80mm)/td>
    Weight 1.72 lbs (0.78 kg)
    Operating Temperature 32ºF to 113º (0ºC to 45ºC)
    Operating Humidity 10 to 85% non-condensing
    Storage Temperature -4ºF to 158º (-20ºC to 70ºC)
    Storage Humidity 5 to 90% non-condensing
    Regulatory Approvals
    Safety CE, SAA, UL, cUL
    Emissions CE, C-Tick, FCC Part 15 (Class B)
    Other RoHS, WEEE Complaint

    Ordering Information

    Part No. Description
    A2-777160-HR-01 ZigBee only
    A2-713150-HT-01 ZigBee and HomePlug