The Relay Controller from Jetlun is an ultra-slim, ZigBee-enabled, general purpose relay switch that includes up to eight (8) relays and a built-in temperature and humidity sensor. The Relay Controller allows virtually any device connected to send and receive a ZigBee signal for automation. It is ideal for a variety of applications, including but not limited to HVAC control, irrigation, and security.
General |
|
Standard Compliance | IEEE 802.15.4 |
Interface | 8 terminal blocks |
ZigBee |
|
Data Rate | Up to 250 kbps |
Security | 128-bit AES Encryption |
TX/TX Sensitivity | -99dBm Rx typ. (-100 in boost mode) at 1% packet error rate and +3dBm TX output power (+5dBm in boost mode) | Measurement |
Temperature Range | 104ºF to 212ºF (-40ºC to 100ºC) |
Temperature Accuracy | +/- 0.5ºC |
Temperature Resolution | 0.01ºC |
Humidity Measure Range | 10 to 95% Relative Humidity |
Humdiity Measurement Resolution | 0.01% |
Humidity Accuracy | 5% Relative Humidity |
Power Requirements |
|
Power Supply | 24V AC 50/60Hz |
Power Consumption | Max 1.5W |
Environmental |
|
Dimensions (LxWxD) | 4.1x3.7x0.9"F (104x94x22) |
Weight | 0.25 lbs (0.55 kg) |
Operating Temperature | 32ºF to 122ºF (0ºC to 50ºC) |
Operating Humidity | 10 to 90% non-condensing |
Storage Temperature | -40ºF to 130ºF (-40ºC to 55ºC) |
Storage Humidity | 5 to 95% non-condensing |
Regulatory Approvals |
|
Safety | CE, SAA, UL, cUL |
Emissions | CE, C-Tick, FCC Part 15 (Class B) |
Other | RoHS, WEEE Complaint |
Part No. | Description |
A2-777270-HR-21 | Relay Controller |